C8125 8140 Cationic Polyacrylamide PAM Flocculant for Papermaking Water Treatment

Blufloc CPAM Description:

1. Bluwat produces different molecular weight Cationic Polyacrylamide with different Charge Degree equivalent to C8125, 8140 for municipal water treatment and sludge dewatering, it can fit the equipments of belt press filter, Centrifuge or screw dewatering machine;
2. Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive, it can be stored at room temperature, it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.

Note: our product can be made upon your special request.

1

Dissolving
concentration:

Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.

2

Dissolving
time:

The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.

3

Agitation
speed:

The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.

4

Application
and Dosage:

The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.

5

Jar Test:

Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.

Bluwat Company Profile

Bluwat is a leading and TOP 5 Polyacrylamide manufactory in China, we produce Anionic PAM, Cationic PAM and Nonionic PAM, with annuel capacity about 60000tons, and export over 30000 tons to more than 50 countries every year

Blufloc APAM Package and Storage:

• Packed in Kraft or PE bags with inner plastic bags, with each bag containing 25kgs, or 750kgs net big bag.
• Stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.